1. Jandei Central De Incendios 2 Zones Manual Pdf
2. Jandei Central De Incendios 2 Zones Manual Gratis

MKII Soft & Hard Addressable Fire Alarm System (MKII Protocol)

RP-2001 is a UL listed six-zone fire alarm control panel for single and dual hazard deluge and preaction applications, providing fire detection, signaling and protection for commercial, industrial and institutional buildings requiring water-based releasing. Features & Benefits: Designed for sprinkler standards NFPA 13, 15 and 16. Audirvana plus license file download. PDF On Jan 1, 2009, A.J.D. Ferreira and others published Los incendios forestales en Portugal. Aportes para la comprensi??n del impacto en la degradaci??n de suelos y aguas.

Addressable Fire Alarm Systems (Standard Protocol)

2 Wire Fire Alarm Systems

Soft Addressable Fire Alarm Systems

Conventional Fire Alarm Systems

Aspiration Detection Systems

Fire Suppression Systems

Linear Heat Detection Systems

Gas Extinguishing Systems

Jandei Central De Incendios 2 Zones Manual Pdf

Standalone Fire Alarm Systems

Domestic Battery Operated Fire Alarms

Jandei Central De Incendios 2 Zones Manual Gratis

• Detalles

  Line impedance for ground fault detection (Option Bus, conventional input, NAC, secondary power circuit, MUX Bus, AUX power, SMK power)	10 kΩ or less
  Power (Input)	120 V 60 Hz 1.4 A or 230/240 V 50 Hz, 0.7 A
  Power (non‑resettable Auxiliary)	17 to 31 VRMS, unfiltered, 1.0 A
  Power (resettable Smoke)1	20.4 to 28.2 VDC nominal, filtered, 1.0 A.
  Power (Option Bus)	12 VDC nominal, 500 mA
  Power (Notification Appliance Circuit [NAC])2	Each NAC has 24 VRMS nominal, unfiltered power with up to 2.5 A capacity (but limited by overall 4.0 A capacity)
  Power (Optional Standby Batteries)	Two 12 V (in series), 7 Ah to 40 Ah
  NACs Line Impedance (voltage loss)	1.5 V
  Recommended battery manufacturers3	Power Sonic: PS-1270, PS-12170, PS-12180YUASA: NP7-12, NPG18-12
  1 For compatible smoke detection devices, see also the FPD‑7024 Smoke Detector Compatibility List.2 For compatible NAC devices, see also the FPD‑7024 NAC Compatibility List3 If other manufacturers or battery types are used, ensure that the battery or batteries can handle an initial charge current of at least 1.7 A.
  Temperature (operating and storage)	+32°F to +120°F (0°C to +49°C)
  Wiring	Class B or Class A
  Notification patterns	Configurable for steady, pulsing, California March, Temporal (ANSI) code 3, synchronized Wheelock, synchronized Gentex, and synchronized System Sensor.
  Local (on-board)	The main control panel includes Three Form C relays. The relay contacts are rated at 5 A, 28 VDC. No over current limiting is performed on the contacts of the relays. The default selection for the relays is to indicate general alarm (relay 1), general system trouble (relay 2), and supervisory (relay 3). By using point or zone mapping, they can be programmed to activate in a wide variety of conditions.
  Remote1	Eight Form C relay outputs are provided by a D7035 Remote Relay Module. The module connects to the FACP through the option bus. The outputs are fully programmable, exactly as the local relays are programmed. Each output operates independently of the other seven to provide complete flexibility. Communication with the D7035 is supervised. Contact Rating: 5 A at 28 VDCNumber of Modules: two units maximum.
  1 For wiring requirements, see Option bus wiring requirements.

  Imágenes

• Certificados (2)

  Título	Tipo	Idioma
  UL	PDF
  ANATEL	PDF

• Documentos (9)

  Título	Tipo	Idioma
  Hoja de datos	PDF
  Manual de instalación	PDF
  Nota de la versión	PDF
  Hoja de registro de programa	PDF
  Especial (Instrucciones de funcionamiento del FPD7024)	PDF
  Especial	PDF
  Especial (- Smoke Detector Compatibility List)	PDF
  Especial (NAC Compatibility List)	PDF
  Ilustración CAD DWG	DWG

• Descarga de Software (1)

  Título	Tipo	Idioma
  FPD-7024 Battery Calculator v1.10.02	ZIP